Brotec Blacktop was founded by Maverick and Zane McHugh with one goal: to provide top-tier asphalt maintenance in western Wisconsin. Through dedication to superior workmanship and customer satisfaction, we’ve earned a reputation as the region’s trusted pavement experts.
At Brotec Blacktop, we provide more than just pavement maintenance—we deliver tailored solutions designed to meet your specific needs.
For years, we've helped property owners preserve and restore high-quality parking lots, roads, and driveways, earning the trust of both residential and commercial clients. We understand that managing asphalt can be challenging, which is why we make the process effortless for you.
From seamless sealcoating for driveways to full-scale parking lot restoration, our team is committed to delivering exceptional results with unmatched reliability.
When you choose Brotec Blacktop, you’re choosing durability, quality, and a hassle-free experience.
Sealcoating your driveway will extend the life of the pavement structure. Sealcoating acts as a waterproofing agent, minimizing the rate at which water enters the asphalt. The intrusion of moisture into asphalt accelerates its deterioration and is strongly related to asphalt failure. Sealcoating asphalt prevents the seepage of water and moisture from rain and snow, thus preventing damage from freeze thaw cycles which is a common reason your driveway begins forming cracks or even worse, pot holes. Sealcoating leaves a smooth, clean surface and gives your entrance a fresh and new look. Sealcoating fills surface voids, and helps hide small cracks, patches and rough spots. Sealcoating costs pennies per square foot compared to the dollars needed to repair or replace aging asphalt pavement structures.
We use the best commercial grade sealer on the market, which exceeds specifications and contains proper amount of silica sand per gallon to ensure a very durable longer lasting application. A select mix of additives are blended to improve durability. Our sealer is also non-toxic, non-flammable and very eco-friendly. It has no solvents or petroleum distillates (i.e. kerosene, gasoline or diesel).
Temperatures and sun exposure will determine dry times for freshly sealcoated blacktop. We recommend waiting a minimum of 48 hours following application of your new sealcoat.
Yes, it’s generally fine to walk on your freshly sealcoated driveway after it has had a few hours to dry in the sun. However, drying time may vary depending on temperature and weather conditions, so it could take longer in cooler or damp environments. We recommend avoiding foot traffic for at least 24 hours unless absolutely necessary. A good rule of thumb is to gently touch the surface of the sealant to check if it’s dry to the touch before walking on it.
It's generally recommended to sealcoat your driveway every 2 to 3 years. This helps protect the asphalt from weather damage, oil spills, and wear from traffic. However, the frequency may vary depending on climate, traffic volume, and the condition of your driveway.
We will do our best to eliminate existing oil stains from your driveway. We apply an oil spot primer which is brushed onto the stain to prevent it from eating through the new layer of sealcoat. Unfortunately, not all stains can be completely removed, but this primer usually eliminates normal oil stains. There is no guarantee on the treatment of oil stains following your sealcoat application.
When you begin using your driveway after sealing, you will notice for the first few weeks to a month, that it appears to be marking from the wheels of your car; this is to be expected and is normal. What’s happening is that the sand in our sealant mix is loosening at the very top of the coating. This will go away and clean up with time. Try not to turn your wheels in one place when not moving. This can result in what we call power steering marks. This will also fade with time and is not a warranty issue.
Please make sure your sprinkler system is turned off 24 hours prior to sealcoating and a minimum 0f 48 hours after sealcoating. This can potentially wash away the sealer.
We will fill ¼’ inch to 1” inch cracks with hot rubber. The crack sealer may not be smooth or flush to the asphalt, and may sink a bit based on outside temperatures and earth movement over time. This is normal and is not considered a warranty issue. Surface cracks smaller than ¼’ inch wide and alligator cracks will not be filled with hot rubber. While the sealer will seep into the cracks and make them airtight, it will not fill or repair them. If you have alligator cracks, sealcoating will help save your driveway from further cracking and deterioration, but it will not make the existing cracks go away. You would need to have the asphalt cut out and repaired to solve this type problem.
We will use high powered blowers and steel brush brooms to remove sand, dirt, and free-floating debris. We will treat existing oil stains, and clean vegetation extending through the cracks. We also weed whip driveway edges to give your surface a clean outside edge.
Anything that scrapes your driveway can damage it. Many scrapes and scratches look worse than they really are. Some snow removal companies use a rubber or polyurethane cutting edge on their plow blades to lessen the impact on your driveway, while others set the plow blade 1/2" above the surface to avoid damage. If possible, we recommend either option. Flat surfaces usually don't see any damage, it's uneven surfaces with high areas or sudden grade changes that are most susceptible to winter plow damage.
Let’s turn your pavement needs into solutions. Contact our team for expert assistance!
Terms of Use
Privacy Policy
Cookie Policy
© 2025 Brotec Blacktop LLC. All rights reserved.